KJ4ERJ's satserver will send you live tracking data to your APRS radio anywhere, anytime.
Just send an APRS message to ISS from any APRS radio (on the national APRS channel) and if you are in range of the global APRS network (an IGate nearby), then it will respond with the time to AOS and the direction of AOS, max elevation and LOS. This also works for all satellites. For example, send a message to FO29 and get its prediciton for your location. (Of course, you have to have sent your current APRS position if it is different from when you last used that radio and callsign).
You can see the types of responses as collected by APRS.FI messages page:
http://aprs.fi/?c=message&limit=25&call=ISS
So, if you find yourself outdoors in the mobile, with nothing to do while the wife is in the mall, just send the above message and see if anything is coming up soon. Of course, to actually work APRS via ISS, you will have to QSY to the ISS channel 145.825 and change your path to via ARISS for the pass (*instead of the usual WIDE2-2 for terrestrial APRS)
For a full dscription, see: http://aprsisce.wikidot.com/doc:satsrv
When I send a query, I like to use the text "pass?" this is so that others seeing the message will know what you are tyring to do. The text of the message can be anything actually...
THink of APRS as your ham radio smartphone... access to data anywhere, anytime.
Bob, WB4APR
* Note, that the ISS will ALSO digipeat the WIDE2-2 path, but it will not insert its RS4ISS* callsign in the path for proof that you were digipeated via the ISS. So it will "work" without changing from the standard WIDE2-2 path, but you will have no proof. Also, as soon as you use that radio even a few minutes later back on the national APRS channel, the sucessfull packet via ISS will be overwritten by the next terrestrial packet in most APRS Web interfaces. SO if you want to make an APRS contact via ISS and preserve it, you should use a unique callsign SSID only for your satellite operations. Good luck. Bob
Bob