Gents and Ladies,
I have 2x M2 CP Yagis, one VHF and one UHF that I need to dis-assemble for transport back to the USA. I need to compact the antennas as much as possible to maximize my personal effects shipment to the least amount of CuMtr volume.
These M2 Yagis use the 3/16" aluminum element mounted through the boom, using insulated bushings and stainless steel keepers on each side of the boom to hold the element mounted in the boom.
How does one dis-assemble these elements from the boom? Or, How does one get the stainless steel keepers to "reverse" and slide of the element?
The only thing I can think of is to use a Dremel Tool with bit to cut the SS keepers in half. I suppose I can get more SS keepers once I return to the USA. I would prefer to not go this route if there are other, better ways.
Your helpful comments and ideas appreciated.
Blessings, and 73, Norm
========================================== Norm Beasley, P29NB PO Box 437 Ukarumpa, EHP 444 PAPUA NEW GUINEA
E-Mail: p29nb@yahoo.com ==========================================