[amsat-bb] FT-837 port config question

Hi Im new to the BB list so i hope this has been done correctly....

I have a Yaesu FT847. I have satpc32 that will connect happily to the radio and control everything as required but this only works if i set the radio CAT menu to 9600.

Everything esle i run works at the 57600 CAT Rate and i have to change the radio every time to 9600 CAT rate to use satpc32.

My question is this: i presume there is a file that has the radio CAT configurations within the sodtware. I would like to know if this is accessable and if i can overide the 9600 current setting within satpc32 to change it to 57600?

Thanks in advance

M1AEC