The ARRL can't even get frequencies correct so it's no surprise they are wrong about which frequency to adjust.
If you aren't using computer control to be able to adjust uplink and downlink you adjust the higher of the two frequencies.
Dave-KB1PVH
Sent from my Galaxy S9
On Fri, Jun 21, 2019, 3:05 PM AI9IN via AMSAT-BB amsat-bb@amsat.org wrote:
On the official ARRL VHF/UHF info sheet ( http://www.arrl.org/files/file/Field-Day/2019/2019%20Above%2030%20MHz%20-%20... ) they suggest that for satellite QSOs operators should only adjust their receive frequency regardless of whether it is VHF or UHF. I thought standard procedure was to adjust the higher frequency whether it is transmit or receive.
Steve AI9IN _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb