Frank, I have read through the manual and it doesn’t appear the IC-910 has a button to long press to put it in digital mode. Also, I learned that the 9600 mode is only a toggle for the TX. On RX, it doesn’t change the signal getting on pin 4 or not. The audio is always on pin 4. -Kevin
-----
The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence.
On Oct 10, 2018, at 11:06, Frank K6FW1@verizon.net wrote:
I have a IC-9100. In addition to setting the menu item to 9600 baud, the radio has to be in FM digital. To put the IC-9100 into FM digital the FM mode button is de[pressed until the “D” icon shows on the display. This disables the filtering to allow the DUV audio from the satellite to pass onto the sound card. I don’t have an IC-910 so don’t know if this applies to that radio.
I am using the IC-9100 into a computer sound card and Foxtelem and decoding the data and uploading to the server.
Frank K6FW