By the way, the Fox Delta kit has 9 pin serial connector but I just use a USB converter and it works fine. I've had excellent results with the RT Systems serial/USB converter
David
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of David Wing Sent: Tuesday, August 25, 2009 12:47 PM To: AMSAT-BB@amsat.org Subject: [amsat-bb] Re: HRD+FT-847+G5500 need usb controler
Raul,
I'm using SatPC32 not HRD but I've been using the Fox Delta ST2 and it works very well for me. I'm also using the G-5500 and FT-847.
http://www.foxdelta.com/products/st2.htm
Good Luck David K6CDW
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Raul Romero Sent: Tuesday, August 25, 2009 12:40 PM To: AMSAT-BB@amsat.org Subject: [amsat-bb] HRD+FT-847+G5500 need usb controler
any have info for controler to yaesu rotator over usb need Economy unit
Tnx Raul CA3SOC
--------------------------------------------------------------------- "Are you still wasting your time with spam?... There is a solution!"
Protected by GIANT Company's Spam Inspector The most powerful anti-spam software available. http://mail.spaminspector.com
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb