Hello,
I had the same problem here on the same pass. Checked everything that could be checked but nothing from me on the downlink. Signal was strong. Audio file is here:
http://www.on4hf.be/HO-68-21dec2009-18u41.wav
Eric Knaps Waterstraat 30 B-3980 Tessenderlo Belgium
Tel. +32472985876 (mobile)
Cor schreef:
Hello All,
PE0SAT earlier mentioned that he could not work over the XW1 FM repeater. I noticed the same, I couldn't either via uplink 145.825Mhz (tone 67hz). Was there something chanced? Was the freq. and tone (written above) correct?
73's Cor PD0RKC
Hi,
I was unable to open the uplink with my Yaesu FT-847. The PL tone was set 67.0 Hz but unable to open the uplink channel.
During the pass I tryed the following.
- Checked Subtone.SQF file twice SatPC32 (XW-1,67.0,$3F,1)
- Checked Doppler.SQF (XW-1,435675,145825,FM,FM,NOR,0,0,Repeater-BBS)
- Restarted SatPC32
- Switched of and on the Yaesu FT-847
- Did a manual setup via menu option 12 for the tone frequentie
- Used FMN on the uplink
Nothing worked :(
There where only three or four stations active during this pass and that makes me wonder if I was the only one with tone problems?
I did receive some BBS Packets:
BJ1SA-12>BBSTAT>UI,C,F0: Open BJ1SA-12:0
BJ1SA-12>BBSTAT>UI,C,F0: Open BJ1SA-12:0
Maybe beter luck next time
73's PE0SAT _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb