In a message dated 14/10/2009 23:17:11 GMT Standard Time, n1miw@cox.net writes:
My final thought on this is - if you can't get the receiver to decode commands, it's a loss, end of story. If it will receive, make it open the panels to get more power to the bird. Once the satellite is fully illuminated by the sun during its rotation, then try to work on stabilizing the satellite. Until that is tried, I personally feel that not every last attempt at reviving AO-40 has been attempted,
Hi.
The first time I read the post, I thought simply, no power = no receiver so no command to the satellite.
But then, I thought of something else.
When AO-40 was built, it would be launched with all systems off. When released into space some hardware would have switched on the receivers and a transmitter for telemetry.
Now, it's sitting there with a shorted battery.....or is it?
If the battery were to open circuit, then the satellite may think it's being switched on for the first time. But with AO-40 I seem to remember that telemetry was on 2m.
The significance of your idea and my memory....is that the 2m transmitter does not work. So we would need to send a command to turn the S band transmitter on.
It is virtually impossible for S band to just appear, like AO-7 did if it is not the default mode at switch on. But it completely justifies your idea of sending a command at it every now and again.
Thanks for the thought
Regards
David