Hello Gerald,
Look at AGW Packet Engine, this can be connected to a hardware TNC in kiss mode. When that is working connect UISS via the AGW protocol to AGW Packet Engine.
So the setup would look like:
UISS -- via localhost tcp port 8000 -> AGW Packet Engine -- via RS232 serial --> MFJ-1270C TNC
73 Jan PE0SAT
--- With regards PE0SAT Internet web-page http://www.pe0sat.vgnet.nl/ DK3WN SatBlog http://www.dk3wn.info/p/ Online Telemetry Forwarder: http://tlm.pe0sat.nl/ irc://chat.freenode.net #Cubesat - Twitter @pe0sat
On 07-12-2016 22:07, Gerald Payton wrote:
I am trying to install equipment for packet communication through ISS. I thought that UISS software worked with EITHER a software modem OR a TNC, but reading (at least starting to read) the 75 page manual, apparently it does not.
Since it does not, please suggest another terminal program or APRS/Packet specific program.
My approach for the hardware is an old MFJ-1270C TNC. I'm trying to learn its ins and outs from its 287 page outdated manual. GROINK Additionally, I have a cable ordered with modular end for my radio (IC-2730).
Any advise or Elmer-ing will be highly appreciated. It has been over ten years since I had any experience with packet or APRS.
My personal email is either AB5R at AMSAT, ARRL or gp_ab5r@outlook.com
73,
Jerry AB5R
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb