Hi Curt,
For CP you would either have the elements offset and feed them in-phase, or have them not offset and feed them with the phase delay. You want to create a spin to the wave as it travels down the boom. I expect doing both would make a mess out of things.
Greg KO6TH
Date: Fri, 2 Jan 2009 10:19:23 -0500 From: cptcurt@flash.net To: amsat-bb@amsat.org Subject: [amsat-bb] Question adding RHCP to Cheap Yagi
Good Morning All:
I've been using a 10el version of Kent Britain's Cheap yagi for my 70cm downlink antenna. It suffers from deep fades so I am going to add the second yagi with physical offset to get to RHCP in the x config.
Question is:
normally I would reverse the coax connections to a dipole driver but this is a hairpin (half of a folded dipole. )
Do I reverse the connections as normal? Kents instructions just say offset the elements and feed in phase.
Thanks
Curt KU8L
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_________________________________________________________________ Send e-mail faster without improving your typing skills. http://windowslive.com/online/hotmail?ocid=TXT_TAGLM_WL_hotmail_acq_speed_12...