On 8/19/18, Ron VE8RT ve8rt@yknwt.ca wrote:
Missed that somehow this morning. Still must manually enter the frequencies but the displayed Doppler corrected frequencies are big enough. Tried it on a pass of XW-2F, it was manageable as I could leave the antenna alone for a while. Could hear myself without "hunting" for the downlink signal.
<snip>
Once you've opened the "Radio Control" panel, you have to choose which satellite and mode you're interested in by selecting them from the menu. Click on "T" and the frequencies will be set to the mid-band values. Then click on "Track" and the frequencies will begin changing.
If you want to change the frequencies, simply click on the triangles above the appropriate digits and the value will change by one increment each time (the upper triangle if you want to increase that value, the lower one if decreasing).
73s
Bernhard VA6BMJ @ DO33FL