Carl,
Perhaps someone with first hand experience will have a suggestion.
73s,
Alan WA4SCA
<-----Original Message----- <From: carl creamer [mailto:ccreame@pacbell.net] <Sent: Sunday, September 29, 2013 5:00 PM <To: APBIDDLE@MAILAPS.ORG <Subject: Re: [amsat-bb] Satpc32 Storing Rx/Tx addreses < <Thanks Alan: <Well for some reason it does not work for me. <My Radio is set as IC-821h which requires addresses of $4c $4c <When I open the the set up window after a restart the address <show up as $60 $60, which is for the 910h I believe so I <change it to setup/radio setup/addresses/$4c $4c/addresses OK <And then I do the mode/addresses $4c $4c save and store. Then <restart Satpc and both the Mode and setup addresses show up <again as $60 $60 and I have to change them to $4c $4c again . <So I must be doing something wrong , but I don't know what it is. <any suggestion? <Thanks <Carl < <________________________________ < <From: Alan wa4sca@gmail.com <To: 'carl creamer' ccreame@pacbell.net; AMSAT-BB@amsat.org <Cc: CC APBIDDLE@UNITED.NET <Sent: Sunday, September 29, 2013 2:33 PM <Subject: RE: [amsat-bb] Satpc32 Storing Rx/Tx addreses < < <Carl, < <I don't use Icoms now, but I tried configuring for one. <Everything worked fine, and the values I set <were retained when I restarted the program. There is an <additional Addresses OK button to the left <which I needed to click, in addition to the usual Store. < <73s, < <Alan <WA4SCA < < <<-----Original Message----- <<From: amsat-bb-bounces@amsat.org <<[mailto:amsat-bb-bounces@amsat.org] On Behalf Of carl creamer <<Sent: Sunday, September 29, 2013 2:10 PM <<To: AMSAT-BB@amsat.org <<Subject: [amsat-bb] Satpc32 Storing Rx/Tx addreses << <<I'm having an issue with having Satpc32 storing the Mode/Rx/Tx <<addresses. <<When I start the program, I store the correct settings for my <<Icom and it all works fine , but when I reboot and/or restart <<the Satpc32 later I have to go to the mode screen and reset <<the Mode/Rx/Tx addresses. <<Is this normal or is there a way to have them permanently stored? <<Thanks <<Carl <<_______________________________________________ <<Sent via AMSAT-BB@amsat.org. Opinions expressed are those of <<the author. <<Not an AMSAT-NA member? Join now to support the amateur <<satellite program! <<Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb << < < < < <