Swap cables and see if the problem follows the cable(rotor) or always stays on the EL meter. That should divide the problem in half first.
Charles Reiche
On Tue, Jul 18, 2017 at 5:56 PM, Albert van Deursen avdeur@home.nl wrote:
Hi all,
All of a sudden the elevation meter stopped working of my Yaesu G-5500 rotor controller unit .
No issue with the AZ meter. Rotor itself keeps on steering / working without any problem in EL &AZ (via interface EA4TX ARS-USB) so all still working fine (fortunately !) for satellite work.
Looks like a component failure in the controller unit or the meter itself ?
A physical check (opening the controller unit) didn't show any anomaly. Being a not too tech ham was wondering if any of you Yaesu rotor users had seen this problem before / around ?
Possibly anyone to hint/ indicate at a quick check in the schematic wire diagram to where to start looking for this failure ?
Thanks beforehand for yr appreciated advice
73
Albert
PD0OXW
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb