Mark, When I was starting on the packet sats, I had similar problems. Maybe you've already done this, but be sure that the "LAN" box is checked on UISS. I use DireWolf for my packet engine, so the set up may be slightly different, but checking the LAN box got the two programs talking to each other very nicely.
Steve AI9IN
----- Original Message ----- From: "Mark Lunday" wd4elg@triad.rr.com To: amsat-bb@amsat.org Sent: Tuesday, February 09, 2016 11:04 PM Subject: [amsat-bb] Question about APRS/UISS
I am wondering why my AGW Packet Engine Pro shows decoded signals from the ISS but the UISS does not show any data.
When I switch over to 144.39, almost all of the packets don't show up in UISS either. Is there some special setting I need to use? I don't have any filters enabled on UISS.
Is there a better interfacing program with AGW Packet Engine than UISS?
Mark Lunday, WD4ELG Greensboro, NC FM06be wd4elg@arrl.net http://wd4elg.blogspot.com
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Steve Kristoff skristof@etczone.com