![](https://secure.gravatar.com/avatar/26e710950836adffa322452b9fdc420e.jpg?s=120&d=mm&r=g)
Dear Folks:
I have two questions.
First, I am having trouble figuring out CAT for the linear satellites (not as critical as FM birds, but my CAT works for those just fine). When I create the Doppler.Sqf file for SatPC32, do I used the center frequency for the passband as the entry into the file, or should I use some other frequency? When I try and use CAT for the linear birds, it really doesn't work (the downlink and uplink frequencies rarely match up and I end up adjusting for doppler manually after turning CAT off).
Second, I initially typed up my Sqf files by hand after reading the instructions. However, I checked out the Sqf file generator on the AMSAT and notice that the file generated always ends with a ",". Since I hadn't included that when I manually typed the files (I've since added it) is it possible that that could be part of the problem on the linear birds?
Thanks for any help you can give me and 73 de Bernie, KF0QS