Hi George,
I have found that as I have added additional software programs to work with HRD, such as N1MM Logger and HDSDRplay, I have had to install Virtual Serial Ports Emulator and run the Splitter function. It creates a number of virtual serial ports that I can connect HRD, N1MM and HDSDR without any conflict. On my system I point VSPE to COM 4 and then have created a virtual serial port at COM 20. HRD, N1MM and HDSDR and then connected to COM 20 and they all work fine. Give that a try and see if it helps. Good luck!
73,
Bob N6REK
On 1/25/2019 4:48 PM, George Sakai via AMSAT-BB wrote:
Hi All, I have just installed Ham Radio Deluxe in my Windows 10 computer which I use for SatPC32. My radio is IC-9100. The computer has two COM ports. One is used for SatPC32 and I designated the second COM port for the Ham Radio Deluxe. But, the Ham Radio Deluxe does not connect to IC-9100. What am I doing wrong? Appreciate any help. 73, George N3GS, EM28 in Kansas _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb