On 11/18/2010 11:20 PM, G. Beat wrote:
Tony - REMEMBER -- ALL this hardware is METRIC. So use the proper parts and tools !> w9gb
Yes, I was reminded of this the other day when I removed the rusty hardware. I have the proper tools and all I need now is the replacement parts ; )
Thanks again
Tony -K2MO
----- Original Message ----- From: "Tony"dxdx@optonline.net To: "G. Beat"gregory.beat@comcast.net, "AMSAT-BB"amsat-bb@amsat.org Sent: Thursday, November 18, 2010 7:21:45 PM Subject: Re: [amsat-bb] Re: Kenpro 500 parts?
Greg,
Wow! Thanks very much for that wealth of information on the old Kenpro. My old unit still works fine, but some of the hardware is rusted pretty bad. The G550 hardware looks identical so I may be in luck.
I also need the terminal cover, but I doubt Yaesu has it since they don't use that type of wiring configuration anymore. Need to find some generic cover that fits.
Thanks again Greg
Tony -K2MO
On 11/18/2010 4:58 PM, G. Beat wrote:
Tony -
Unless you have access to a local machine shop and machinist,
your only source for these Japanese manufactured parts is Yaesu USA.
SOME of the KR-500 parts may be identical (common) to the current production Yaesu G-550 elevation rotator.
Yaesu purchased the Kenpro Company which originated these designs.
The individual azimuth and elevation rotators were KR-400 and KR-500.
Later came the KR-5400, the KR-5400-A/B and the KR-5600-A/B.
[i]After the purchase, Yaesu eventually changed these prefix designations to "G" from the earlier "KR".
DIY REPAIR SITES for the KenPro / Yaesu Rotators, Courtesy of the previous KenPro/Yaesu queries from QRZ and AMSAT-BB reflector (archives)
Henk, PA3GUO (Netherlands) described the repair and cleaning of the KR400 and KR500 rotators (Photos). http://www.pa3guo.com/
KENPRO-YAESU ELEVATION ROTATOR MAINTENANCE This is a useful collection of articles compiled by longtime AMSAT member Ron Long W8GUS. Common faults of the KR-500 series elevation rotator and its derivatives are described. Instructions, hints and tips for disassembly, cleaning, and rebuild are included. ZIP File size 11.5K. http://www.users.zetnet.co.uk/clivew/kr_rot.zip
W7KKE had a web page that demonstrated the rebuilding of his Yaesu G-5500 Az/Elev rotator,
however that web page is now gone. : -(
http://webpages.charter.net/k.swaggart/W7KKE/w7kke.html
IF you need parts or desire to have the rotator repaired by Yaesu, you can contact the Yaesu service department in California that handles rotator repairs.
Vertex Standard USA Attn: Amateur Repair 10900 Walker Street Cypress, CA 90630 For customer service, technical support or parts, please call: 714-827-7600 ==== K6VLF in Fresno, CA started a repair business for older KenPro / Yaesu rotors --- Contact him for details! * Phone: (559) 264-0772 * Email: k6vlf@comcast.net * Web: http://yaesurotorrepair.com
Talino, IZ7ATH has photos (belt) of his repair http://www.qsl.net/iz7ath/web/02_brew/13_rotor/english/pag07_eng.htm
Full article http://www.qsl.net/iz7ath/web/02_brew/13_rotor/english/pag02_eng.htm
His web site http://www.qsl.net/iz7ath/web/home_eng.htm
KenPro KR-500 manual http://www.w4rp.com/KR500/index.html
http://www.g4dmf.co.uk/rotatorinfo/rotators.html
Yaesu G-550 manual http://www.yaesu.com/downloadFile.cfm?FileID=968&FileCatID=155&FileN...
Greg
w9gb ===
Date: Thu, 18 Nov 2010 00:37:12 -0500 From: Tony, K2MO Subject: To: AMSAT-BB
All,
Can anyone tell me if the mounting hardware on the Yaesu G-550 is the same as the old Kenpro KR-500? Anyone other than Yaesu selling parts for these units?
Thanks,
Tony - K2MO _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
__________ Information from ESET NOD32 Antivirus, version of virus signature database 5631 (20101118) __________
The message was checked by ESET NOD32 Antivirus.