I have not had an issue with mine but I would check to see if you have voltage going to the feedback potentiometers first. That supply would have both az and el in common. Mike
On Saturday, June 22, 2024 at 08:36:38 AM EDT, jeff griffin via AMSAT-BB amsat-bb@amsat.org wrote:
After Sitting for 6 months my rotor is acting up. It was working 100 % When I left for the winter. Big issue is it isn't displaying any AZ EL data on the display, and appears to be sending bad data the the LVBTracker. The rotor operates manually but there is no AZ EL data displayed. When I try to track a sat with SatPC32 it seems that that the 5500 is also sending bad data to the LVBTracker as the antenna EL runs away , and the AZ data is also way off. So my question is did anyone also have this issue? I'm thinking it's in the control box as bot AZ and EL are affected. As I can't see the antenna from my operating position I'm off the sats until I can fix this. Any help would be greatly appreciated.
73 Jeff kb2m
-----------------------------------------------------------
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org