2 meters, and 40 feet. That is a short run. There are many afordable coax options.
The only coax you would never use is Beldon 9913 or RG-58. However you should still stick with a Brand name RG-8 flavor with 95% shielding or better.
9913 kinks and once it kinks throw it away. RG-58 flavors are ok for less than 20 feet and power less than 200 watts on 2-meters.
For 440 (formerly called 70 cm) I use 0.240 inch LMR-240 coax for all mobile operations.
If you have Long runs or need very low lo$$, then your best options are Thicker cables LMR-400 and up. I use LMR-600 for all outside runs.
--- Ken Owen [email protected] wrote:
Hi folks:
I get a lot of questions from folks about the best coax types for weak signal/satellite work. I found a good source for LMR400 (equivalent) which I use for both my two meters and 430 antennas. It's overkill for two meters though, since I have only have about a 50 foot run. I know someone who is planning a run of about 40 feet and he's using a pre-amp at the antenna. What would the group recommend for the two-meter coax?
Thanks,
N6KTH
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ