If your receiver is equipped with AFC, like the Icom IC-910, it will correct for doppler without the need to do it in software...
George, KA3HSW
----- Original Message ----- From: "Scott" scott23192@gmail.com To: amsat-bb@amsat.org Sent: Sunday, November 13, 2016 1:48 PM Subject: [amsat-bb] Note ref. doppler w/ UHF iGate listener for ISS Packet
Hello everyone.
For anyone who has an interest in using the digipeater on the ISS now that it has switched to 70cm, I wanted to pass along some non-scientific findings.
Of course it's great to see your packets digipeated from the ISS but part of the fun also is showing up on the ariss.net website which lists digipeated packets that were received by a ground station setup as an "iGate" to forward that traffic over the internet (resulting in a listing on the ariss.net website).
It is my understanding that a couple of factors are contributing to a reduction in the number of digipeated packets successfully making it to the ariss.net site.
For one, there are less iGates able to receive on 70cm. That issue can be resolved over time as people naturally add the ability to listen on 70cm with an iGate app.
But another issue that several folks have pointed out is that with the more substantial doppler shift at 70cm, a receiver set to a single frequency will miss much of the traffic sent back down from the ISS.
I have never run an iGate and wasn't completely sure what was involved, but with a number of SDR-equipped Raspberry Pi's around here I wanted to put one more set of ears out there for UHF packet.
I'm sure there are any number of ways to setup a Pi as an iGate; I used the instructions at: https://github.com/wb2osz/direwolf/blob/master/doc/Raspberry-Pi-SDR-IGate.pd...
But how to setup a Pi is not why I wanted to post this. Of course I initially setup my Pi-iGate to listen on the published frequency of 437.550. However, I received very few packets from the ISS.
It crossed my mind that, at the point of closest approach, the doppler frequency is changing quite rapidly. So, I thought that I might improve my count of iGated packets if I listened on a frequency that would be viable for a longer period of time. Using (WD9EWK) Patrick's doppler adjustment guide as a reference, I chose to change my listener to 437.555.
Again, this is not scientific, but I am now receiving more packets on the Pi-iGate than I was before. Only time will tell if this continues. Of course the better solution would be to program the Pi to adjust for doppler throughout the entire pass and there IS code online to provide that compensation. However, I have not been able to get that working.
If anyone is interested, here is the script that I run to activate the iGate listener on my Pi... it runs in the background so that I can log off from the Pi and just leave it running stand-alone.
#!/bin/bash nohup rtl_fm -f 437.555M - | direwolf -l /home/pi/iss-uhf-log/ -c /home/pi/sdr.conf -r 24000 -D 1 - > /dev/null 2>&1 &
#
Hope someone finds this informative and at least one of you might be prompted to add a 70cm iGate to your shack!
73,
-Scott, K4KDR Montpelier, VA USA _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus