There is no need to do this for grid boundaries.
The only reason you would enter separate QSOs for a single QSO is if the station was on county, state, or national boundaries as LoTW doesn't support multiple counties, states, or DXCCs in one QSO. Grid lines and corners are supported.
For example, this is my confirmation from CO6CBF for a QSO from the FL00/FL10 line.
Worked CO6CBF DXCC CUBA (70) CQ Zone 8 ITU Zone 11 Grid FL00,FL10
73,
Paul, N8HM
On Thu, Sep 18, 2014 at 10:10 AM, Steve May steve.w5iem@gmail.com wrote:
I usually just do two entries 1 minute apart with the different grid squares.
Steve, W5IEM On Sep 18, 2014 10:06 AM, w6gmt@bak.rr.com wrote:
I worked K8YSE on FO-29 last night (Thanks John) Posted the contacts to LoTW only to have one of them rejected as a dup. How do others work around this ? usually I only need one of the grids but in this case need both. they would be # 206 and 207. I would ask the LoTW staff but the E-mail site for ARRL.org is still down. 73 Brock W6GMT BROCK THOMSEN PO BOX 222 MARCELL MN 56657 EN37EN _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb