Even though we don't get real weather down here in SoCal, Bob, I put a small plastic trash can over mine.
I found one large enough to fit over the elevation rotor, and cut some holes in it that lined up with the cross-boom. Then I made some slots from the holes down to the edge of the trash can so I could slide it over the cross-boom.
To keep the rain off the azimuth rotor, I cut the square base off a a traffic cone, and opened up the top enough to slide over the mast.
Doesn't look real pretty, but it keeps the rain off!
73, Jim .
On 01/12/2013 06:40 PM, Bob- W7LRD wrote:
For those waiting for the on going rotor drama at the LRD compound. Tipped tower over, removed all antennas, rotor etc. took in shop opened case, one big ice cube inside. The gears can not move through ice! I will clean it up, dry it out, does anyone have any experience with sealing this thing up, making gasket etc ? It is the Yaesu G-5500 elevation rotor. It does rain here a bit (Seattle) hihi 73 Bob W7LRD _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb