Hi Enzo,
Either TNC should work, but I would give the advantage to the Paccomm for AO-51.
73,
Mark N8MH
At 07:33 PM 3/5/2011 +0100, Vincenzo Mone wrote:
Hi Mark, Thanks for your help. I will try on the next Pass ( That will be tomorrow for me ). I have checked in the wisp setup and I have already set how you said: PECHO-11 for Broadcast and PECH-12 for BBS callsigns. As TNC I am using Paccomm Tiny-2 with a NB96 card. I have also a TNC3S. Do you think that the TNC3S is better than the Paccomm Tiny-2 with a NB96 card? Thanks
73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520
********************************** ******* GSM +39 338 9749786 ******* ****** SMS +39 338 9749786 ****** ***** FAX +39 328 7244294 ***** *** 2nd e-mail: vimone@tin.it *** *********************************-----Messaggio originale----- Da: Mark L. Hammond [mailto:marklhammond@gmail.com] Inviato: sabato 5 marzo 2011 15.52 A: Vincenzo Mone; Amsat - BBs Oggetto: Re: [amsat-bb] AO-51 and L/U PacSat BBS Mode
Hello Enzo,
Yes, the 9k6 BBS is operational and working.
Please adjust your uplink freqency (try UP and DOWN in 500 Hz or 1 kHz steps) and see if that helps. Most users report that a high gain antenna
with
10-50 Watts power at the antenna for the L-band uplink results in success.
I find 1268.705 works best for me, sometimes even .708.
Also please check your AO-51 setup in Wisp/Satellite Setup. Broadcast Callsign must be PECHO-11 and BBS Callsign must be PECHO-12.
There is no other active/functional BBS bird at 9k6, nor any with 1.2 GHz uplinks.
Also---what TNC are you using for 9k6? I found out many years ago that
AO-
51 does not like the transmitted signal from my TAPR EVM56k DSP unit, so
it
rarely if ever heard me.
73,
Mark N8MH
At 02:52 PM 3/5/2011 +0100, Vincenzo Mone wrote:
Hi Folks, I am trying the bird on: 9k6 BBS and Telemetry. Does it work? With the MSPE I can just receive numbers like:
B:44253341
What does it mean? I am trying to request the DIR on 1268.700 MHz, but I do not get any response. On the upper side of the MSPE program often I can read:
Frames Heard from PACB-1
I am asking this because I would like to see if my system still works. Is there any other Bird that I can use the 1.2 GHz Band? Any help will be really appreciated Thanks in advance.
73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520
*************************************** ***** GSM +39 338 9749786 ***** ***** SMS +39 338 9749786 ***** ***** FAX +39 328 7244294 ***** *** 2nd e-mail: vimone@tin.it *** ***************************************73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520
********************************** ******* GSM +39 338 9749786 ******* ****** SMS +39 338 9749786 ****** ***** FAX +39 328 7244294 ***** *** 2nd e-mail: vimone@tin.it *** *********************************
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the
author.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb