Thanks Mark.
I'll give that a try. My 'big improvement' was to remove the Fox1Cliff and 1D search windows and tighten the 1A search window in the config file from 20kHz to 12kHz.
Now it just searches for signals in a small range and tracks Doppler perfectly.
73
David G0MRF
-----Original Message----- From: Mark L. Hammond marklhammond@gmail.com To: amsat-bb amsat-bb@amsat.org Sent: Sun, 11 Oct 2015 1:30 Subject: [amsat-bb] Another FCDPP AO-85 telemetry observation
Quick share--
For the FCDPP (Funcube dongle pro plus)---This morning I looked closely at the baseline noise level in Foxtelem. It was quite high, around -50 or so. Since I can't adjust LNA or Mixer (both forced ON in Foxtelem), I went to the Recording Devices Control panel, and adjusted the audio level there---from about 25 (used in all my other SDR programs)---down to 4, so my baseline is about -75. That seems to have helped a good bit, and even unattended on the first pass tonight I see it grabbed 35 or so frames. That's good, since this morning it got ONE.
Anyhow, those of you running FCDPP might check that out...
73,
Mark L. Hammond [N8MH]
_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb