Just saw this on FB. Apparently the radio payload will be tested this week.
https://twitter.com/SpaceComms1/status/1060212162365407233?s=19
73, John Brier KG4AKV
On Tue, Nov 6, 2018, 15:19 E.Mike McCardel <mccardelm@gmail.com wrote:
Thanks,
By the time I found and loaded keps I missed it. 20 degree pass too! I’ll be listening for it later. Looks like a41 degree pass tomorrow 13:22.
EMike
EMike McCardel, AA8EM Senior Editor AMSAT News Service Past AMSAT-NA VP Educational Relations
On Nov 6, 2018, at 2:55 PM, Paul Stoetzer n8hm@arrl.net wrote:
It's 43678 / 2018-84H. Should be up for you right now, EMike!
73,
Paul, N8HM
On Tue, Nov 6, 2018 at 2:53 PM E.Mike McCardel mccardelm@gmail.com
wrote:
Frank, Do you have Keps?
EMike McCardel, AA8EM Senior Editor AMSAT News Service Past AMSAT-NA VP Educational Relations
On Nov 6, 2018, at 2:48 PM, E.Mike McCardel mccardelm@gmail.com
wrote:
FYI, The IARU has coordinated these frequencies for Diwata-2: – 145.900 MHz downlink – 437.500 MHz uplink
Diwata-2’s Amateur Radio Unit Diwata-2’s Amateur Radio Unit (ARU) operates in two possible modes: FM
voice repeater (FMVR) mode, and APRS-based digital repeater (digipeater) mode. The uplink and downlink of these modes are implemented at 437.7MHz and 145.9MHz respectively. The following lists some information that may be useful when utilizing the radio’s services.
Telemetry Formats
The Diwata-2 amateur radio unit (ARU) provides telemetry data in two
forms depending on its operational mode: CW (enabled in ARU voice repeater mode), and FM (enabled in ARU digipeater mode. As the two operational modes are scheduled according to the day of the week, the available telemetry differ in format and content correspondingly. This section explains the data format and specifications for the ARU telemetry.
Continuous-wave telemetry (CW)
The CW telemetry is available when the satellite is in voice repeater
mode. The telemetry messages expected from the ARU will be sent every 1 minute, when the ARU is idle, i.e. there are no ongoing voice operations. This said, the telemetry will not be available when the ARU is busy, and likewise, the telemetry transmission will be abruptly aborted when a voice repeating operation starts while in the midst of telemetry downlink. The data can be received in Morse code format of 120 WPM, at a frequency of 145.9 MHz. The pertinent data format is shown below, and further explained in the table that follows.
From: http://phl-microsat.upd.edu.ph/diwata2
EMike McCardel, AA8EM Senior Editor AMSAT News Service Past AMSAT-NA VP Educational Relations
On Nov 6, 2018, at 2:36 PM, Frank G wa2ndv@gmail.com wrote:
Hello all,
Has anyone heard this new sat beacon ?
I get only a few daytime passes a day here on the east coast and have
not been at the rig during those passes.
73 Frank WA2NDV
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions expressed
are solely those of the author, and do not reflect the official views
of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions expressed
are solely those of the author, and do not reflect the official views
of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb