It's merely on the short list of things that I check when these sort of symptoms show up. Next would be changing the output/input sound level settings. Low/lower early in the chain.
I use direwolf. It gives a signal strength report with a received signal. Software manual has optimal window. Also can do bit flipping to recover unrecoverable packets. (corrupted data retrieved by compting the checksum).
Can you record the RF on an SDR and make multiple tries decoding?
Neatest thing is that RF becomes digital. Store record forward reverse fold spindle and mutilate.
Norm n3ykf
On Thu, Apr 27, 2017 at 8:57 AM, Stewart Todd Morgan morgan_st@bellsouth.net wrote:
The sound card is set for "2 channel 16-bit, 48000 Hz (DVD Quality)." I am not aware that AGWPE lets you set a sample rate for that application.
I have a vague recollection of changing the sound card sample rate from 44100 Hz to 48000 Hz in order accommodate my Alinco DJ-X11T, but I don't recall any sample rate change affecting AGWPE performance on this laptop.
Todd AL0I
On 4/27/2017 7:40 AM, Norm n3ykf wrote:
Stupid question time: Do you have the sound card and audio processing sample rates set the same (identical)?
Norm n3ykf