Hi Kevin,
If you just want to decode 9600 baud you can use a software TNC like the High Speed Sound Modem by UZ7HO. I have used that to decode Falconsat just fine with the UISS software. I think Patrick has an article on that exact setup.
For FoxTelem data I didn't need any sort of TNC, just the radio's audio stream feeding directly into FoxTelem. I have a video with just that. You can use the sound from it to test your own decode. Here's a link to it: https://www.youtube.com/watch?v=ob0BkiZQgFw&t=235s
The TNC Pi9k6 would be useful for transmitting though. It is much cheaper than any other 9600 TNC! I am curious myself if someone has tried to transmit with it using 9600 baud to satellites like Falconsat-3.
On Wed, Oct 3, 2018 at 10:28 PM, Kevin Zari kk4yel@gmail.com wrote:
I'm interested in connecting a TNC-Pi9k6 https://tnc-x.com/TNCPi9k6.htm up to my IC-910 data port, and seeing if I can decode some FoxTelem data. Has anyone played with this, and if not, what TNCs are you using ? Thanks -Kevin (KK4YEL)
The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence. _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb