Check to see if you didn't do something like I did and cut the control cable while doing yard work.
Link to the video and picture. https://x.com/NU1U_ant/status/1828522286896345264
Physically check that first. May save you some time :)
You can switch the EL and AZ cables to see if AZ works again. That's a quick test to see if the pot isn't the problem.
The start of that thread also has some great suggestions. https://x.com/NU1U_ant/status/1828046249481666742
73 -Ant NU1U
On Wed, Nov 6, 2024 at 5:58 PM Richard Lawn via AMSAT-BB amsat-bb@amsat.org wrote:
I repaired recently the EL side of the control box. It was working through external control from the CSN SAT controller but it would not work manually. Now the AZ is frozen and won't work manually or through external control. I'm going to check out the roof top connection tomorrow but I'm anticipating the worst like a bad internal rotor pot.
Can any one give me some voltages to check from the controller and what to look for externally at the rotor itself. Perhaps all this is available somewhere online so a pointer to that would be most appreciated.
73 Rick, W2JAZ
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org