Ditto I've made up 5 of the arduinos loaded with the K3NG software for G5400 antenna controllers. That code is a huge benefit to our amateur community.
Next I'm making an arduino with the same code configured for azimuth only for the hf beam.
Works great.
I'd recommend recycling what you can for the case and buttons Etc and put a 16x2 display on the mega and get it going that way.
Thanks, Mike
Sent from my iPhone
On Oct 30, 2016, at 7:12 PM, Kelly Keeton kellyrkeeton@gmail.com wrote:
If the PIC died likely needs replaced direct from source - not a off the shelf part/ custom programmed chip. Also abnormal for a PIC to wipe clean.
I also agree using mega to replace it has longer term viability.
Sent from a mobile device.
On Oct 30, 2016, at 3:37 AM, Rich/wa4bue richard.siff@verizon.net wrote:
K4AMG has a LVB tracker. It lost memory and has been at least temporarily reset. It was purchased in 2013. The tracker and electronics are stored at another location. I think the chip is U-1, PIC16F876.
What is a vendor source for the chip?
God Bless
R W4BUE Founder K4AMG K4AMG.org _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb