Hello Bob,
Connect AGW Online Kiss (http://www.dk3wn.info/software.shtml) via tcp port to UZ7HO and you will see and save the telemetry.
Good luck and let me know if you have any further questions. Maybe this block diagram can be useful http://www.pe0sat.vgnet.nl/decoding/block-diagram/
73 Jan
On 28-09-2016 20:24, KO6TZ Bob wrote:
Jan,
I had UZ7HO_HS installed on my computer, but have not used it much.
On the 18:00 utc pass I tried it out. I certainly copied more than MixW, but did not display any of the telemetry data. What I received were frames like these: 1: <NON-AX25 frame Len=20> [11:07:27R] 1: <NON-AX25 frame Len=19> [11:07:27R] 1: <NON-AX25 frame Len=32> [11:07:27R] 1: <NON-AX25 frame Len=20> [11:07:27R]
I have to work on settings...
Thanks for the help.
BOB KO6TZ
Hi Bob,
Use the UZ7HO hs_soundmoden and un-tick non-ax25 filter.
Similar to STRaND-1 ALSAT-1N it is not full AX25
Regarding PRATHAM, it should do CW on 145.98 during the whole orbit and AFSK 1200 on 437.455 over there command stations.
But so far nothing heard
73 Jan PE0SAT
On 28-09-2016 18:47, KO6TZ Bob wrote:
Correct me if I am mistaken;
Pratham and AlSat-1N are two different satellites. Pratham is turned on only over India and Europe, and AlSat-1N has a 90 second telemetry beacon 437.650 9K6 FSK. (actually running 4KHz low 437.646)
I have only been able to copy garbled data from AlSat-1n the last three days.
BOB KO6TZ
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb