Hey Dave.
It takes longer to read the instructions that it does to setup a Raspberry Pi to be an iGate.
When the ISS digipeater changed to 70cm, there were not enough iGates so I thought it might be fun to throw one together. There are numerous how-to's online, but this one is perhaps the most straight-forward:
https://github.com/wb2osz/direwolf/blob/master/doc/Raspberry-Pi-SDR-IGate.pd...
... unfortunately, the way the document was created you won't be able to copy/paste commands. But regardless, it's not a difficult process if you have even the slightest familiarity with a Pi or linux in general.
Hope that helps!
-Scott, K4KDR Montpelier, VA USA
--------------------------------------------------------------------------------
-----Original Message----- From: Dave via AMSAT-BB Sent: Thursday, March 02, 2017 9:57 AM To: amsat-bb@amsat.org Subject: [amsat-bb] APRStk ? Or other?
Hi All
I'm setting up an autonomous sat gate using a spare Kenwood TMD700. I seem to remember that once upon a time there was a DOS program called APRStk that could Doppler correct the TMD700.
Does anyone know of a more up to date alternative that would run on a Pi or Pi Zero?
Regards Dave EI4HT / M0GIW