Hi all,

 

I am trying to use a newly purchased StarTech ICUSB232FTN (1 port FTDI USB to RS232 Null Modem Adapter)  to have SatPC32 control my Yaesu FT-847.  For whatever reason, I have not been able to get SatPC32 to control the radio.  Has anyone had experience with using this adapter that might have a few tips to pass along?  I don't know if it is the adapter itself or a step I might have missed in getting SatPC32 and the FT-847 to work.

 

The adapter when plugged in thinks it is in Com4 so I set SatPC32 to be in Com4 with a delay of 20 and baud rate of 57600.  I have also adjusted the radio to use 57600 and have adjusted Com4 to be 57600.  But it could be some other settings would work better, so I am open to suggestions.

 

I am using Windows 10 and version 12.8d of SatPC32.

 

Thanks in advance.

 

73,

Charlie Sufana AJ9N

-----------------------------------------------------------

Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/

View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org
To unsubscribe send an email to amsat-bb-leave(a)amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org