Hi Tanan,
ANDE: ************************************* VOICE Mode activation: Requires a command station in your footprint to activite VOICE for each pass. In Europe we have two stations doing this often, but other continents have less VOICE activity. First watch the telemetry at http://www.findu.com/cgi-bin/pcsat.cgi to see if it has been enabled. It's rare outside Europe.
VOICE Mode usage: Once a command station has activated VOICE on ANDE you do not need to (=must not!) connect ANDE. Just enter in Hyperterminal as CONV: :TALK :Hello (mind the 5 spaces are TALK!) and it will say "HS1JAN says Hello"
RAFT: *************************************1. VOICE Mode activation: Anyone can activate VOICE in by C RAFT. RAFT will say: "Welcome to TextSpeak" After you get connected, disconnect from RAFT without RAFT seeing that (go off frequency and force your TNC to disconnect).
VOICE Mode usage: Once someone has activated VOICE on RAFT you do not need to (=must not!) connect RAFT. Just enter in Hyperterminal as CONV: :TALK :Hello (mind the 5 spaces are TALK!) and it will say "HS1JAN says Hello"
More examples and details are at: http://home.vianetworks.nl/users/hamoen/pa3guo/voice.html or of course at: http://www.ew.usna.edu/~bruninga/ande-raft-ops.html or see my weblog of Jan 5th at: http://home.vianetworks.nl/users/hamoen/pa3guo/
From the above you see that a simple "C RAFT" should
provide already a spoken word out of space !
Please share the results. I am still waiting for the first mp3's from outside Europe !
Success, Henk, PA3GUO
ps: I personally find RAFT much easier, I use a 10 element beam, without preamplifier.
Hello PA3GUO , 9W2QC and All HAM
Could you please advice me step by step for command control to speak of ANDE. I will control RAFT and ANDE speak message of my send to command talk to satellites.
Best Regards,
Tanan Rangseeprom HS1JAN , XU7ADN