Hi Bill, 

Maybe this will help?

https://youtu.be/QhfUSRUP910?si=YaU8luD5gIybAY3U

Not sure if that video leads you to what I’ve done. Get a CI-V interface cable and also use the REMOTE jack on the back (in addition to the USB port). Basically you connect the radio through two different CI-V ports, using one for each program.  It works….

Gosh, now that I think about it. If you’re only lacking PTT seems like you can use the two different ports on the USB connection.  Set up one for keying.  Have done that too. 

Sorry I can’t give you more detailed instructions.  I often figure it out and then move on ;)

Mark L. Hammond [N8MH]



On Sat, Feb 1, 2025 at 7:11 PM Kurious George via AMSAT-BB <amsat-bb@amsat.org> wrote:
Hi folks,

How can I use these two simultaneously with an IC-9700?

1. WSJT-X for PTT control via CAT over USB/COM.
2. SatPC32 for frequency control via CAT over USB/COM.

In other words, two apps controlling the IC-9700 simultaneously via CAT over USB/COM when each is performing a different control?

Bill, KB2SA


-----------------------------------------------------------

Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/

View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org
To unsubscribe send an email to amsat-bb-leave(a)amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org