----- Original Message ----- From: "Joe Leikhim" rhyolite@nettally.com To: amsat-bb@amsat.org Sent: Saturday, September 03, 2011 10:42 PM Subject: [amsat-bb] Adjusting true north for azimuth rotator.
I am planning to install my G5400 rotator inside a tower having a welded rotator shelf. The tower is not installed yet and will have one face against the side of my house which is positioned about 28 degrees northeast (Per Google Earth).
I assume when I drill the rotator shelf, I can adjust for the gross 28 degree offset of the tower. However how important is it to do this at all? Does the rotator have to be installed exactly toward true north or can I make up the difference when clamping down the antenna mast assuming the antenna is oriented true north? Note I will be using a Trakbox and need the ADC to center on true north.
Secondly does anyone know if the ruler function in Google Earth points true north? It seems pretty handy that a fire plug in front of a neighbors house is at about north point.
-- Joe Leikhim
Leikhim and Associates Communications Consultants Oviedo, Florida
www.Leikhim.com
JLeikhim@Leikhim.com
407-982-0446
Hi Joe ,
Your rotator have to be installed exactly toward true north.
First of all using the traching program rotate manually your azimuth rotator until its pointer schowes exacly the azimuth and elevation of the Sun at a selected time preferably near noon.
Now quicly clamp down the antenna rotator to the mast until the antennas are aligned exacly toward the Sun.
Now your Antenna system is calibrated as well toward the North.
73" de
i8CVS Domenico