Hello Sion.
Not sure what's happened to that file, apologies, when I get chance I'll take a look at why the link is broken.
When that was originally written, there wasn't a defined way to set the processor config bits within a .hex file, and I distributed the original .hex files without the config bits assigned. Below, I have links to two files from my archive, the first with the appropriate config bits set, and the second without. For ease of use, I'd use the one with the config bits already set. For completeness, the config bits should be 0x3F31 (FOSC=XT, WDTE=OFF, PWRTE=ON,BOREN=OFF,LVP=OFF, CPD=OFF, WRT=OFF, CP=OFF).
To use, open MPLAB v8, Configure -> Select Device, set to PIC16F877 or PIC16F877A. Then File -> Import and select the hex file. Then select your programmer and program the device.
With config bits set: https://onedrive.live.com/redir?resid=2EDA80327053C74D!49680&authkey=!AE... 6wWMLtnVw&ithint=file%2chex
Without config bits: https://onedrive.live.com/redir?resid=2EDA80327053C74D!49678&authkey=!AE... ylrxNa9ag&ithint=file%2chex
It's been a long time since I looked at this, so apologies if I got anything wrong here!
73, Howard G6LVB
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Sion Chow Q. C. (9W2QC) Sent: 24 September 2015 17:31 To: amsat-bb@amsat.org Subject: [amsat-bb] LVB Tracker v0.9 Firmware
Dear All,
I have been an original LVB Tracker for many years running firmware 0.7. Recently I am having some problems with the serial communications and from the forums, I notice that firmware version 0.9 has resolved these issues.
However, the link published (many of which are few years ago) to download this firmware at http://www.g6lvb.com/Articles/LVBTracker/LVBTrack.hex seems to be no longer valid.
I have been trying to look around but failed to obtain a copy of the firmware version 0.9 .hex file. Would really appreciate any pointers of where I could obtain this new firmware.
Thank you.
73, Sion Chow Q. C., 9M2CQC, WQ2C, 9V1QC, JG1XHM, ex: 9W2QC, AB3IO, WQ2C /HL1 /YB9
_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb