Bob,
If HDSDR will do the same as SDR Console, and emulate a TS2000 as far as CAT is concerned, you could use the helper app I use that a friend of mine - Tom M0LTE - wrote for me:
https://github.com/M0LTE/satpc32-dde-utils
It listens to the SatPC32 DDE stream, and pushes the frequency and mode to SDR-Console (or whatever is configured to pretend to be a TS2000 on the COM port you specify) in real time.
73, John (M5ET)
-----Original Message----- From: AMSAT-BB amsat-bb-bounces@amsat.org On Behalf Of Bob Hammond via AMSAT-BB Sent: 10 November 2019 16:11 To: amsat-bb@amsat.org Subject: [amsat-bb] SatPC32 with BOTH an IC-9700 and HDSDR (and RSP2 SDR)?
I have SatPC32 controlling my IC-9700. I'd like to control HDSDR (and my RSP2 SDR) as well at the same time.
I acquired VSP Manager from K5FR as a solution but I struggle to get it to work with both radios simultaneously. The virtual ports show up ok and I can configure them but I don't get control of the SDR. And the IC-9700 control stops. Yes, the ports used for each radio are different.
Should I use the DDE function as described in section C3 of the SatPC32 manual?
I'm using Win7 and USB ports, of course.
Anyone have some tips to share?
Bob W7OTJ _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb