I've spent at least 6 hours playing with everything imaginable and reading all the FAQs.
Tim
-----Original Message----- From: George Henry [mailto:ka3hsw@att.net] Sent: Monday, December 29, 2008 9:07 PM To: Tim Goodrich; amsat-bb@amsat.org Subject: Re: [amsat-bb] help with 817 and satpc32
Have you read the "Radio Hints" for Yaesu radios under the "?" menu? Not familiar with the 817, but Erich put some very useful information in those hint files....
73, George, KA3HSW
----- Original Message ----- From: "Tim Goodrich" tim@timgoodrich.net To: amsat-bb@amsat.org Sent: Monday, December 29, 2008 9:51 PM Subject: [amsat-bb] help with 817 and satpc32
Hi all,
I just finally upgraded to general over the weekend, so I went out and got
a Yeasu 817. However, I'm having problems with using it for Doppler tracking in SatPC32. Here's what it's doing.
When I turn the control on, the radio will track the frequencies that are showing in SatPC32 for both the uplink and the downlink. It switches between the uplink and downlink frequencies quite often- about once per second. The radio will also switch to the correct mode (FM, etc). However, when I hit PTT, it transmits on the previously stored VFOb frequency.
So, for example....
I tune vfoa to 50.1Mhz, AM and vfob to 50.5Mhz, AM
I turn CAT control on from SatPC32
The radio starts switching between the vhf downlink frequency in USB
and the uhf uplink frequency in USB about once per second to correct for Doppler
- When I press transmit, it transmits at 50.1Mhz, but in LSB
Obviously, it should be flipping between the VFOs (instead of 2 freq's in one VFO).
So it seems like its flipping frequencies in one VFO and then trying to transmit in another VFO, where it changes the mode for transmit, but not the frequency that was originally stored.
Any help please?
Tim
KC2DDS/AG