Erich DK1TB has again implemented another great feature into SatPC32 V12.8b by means of a "patch" file. You can find it in the "downloads" link on his website, www.dk1tb.de Scroll down to Section 7, Patches.
I often hear others talk about meeting someone, usually a long distance new grid square, on a certain frequency. Since doppler is always in play, telling someone you will be on 435.845 is meaningless unless you are both in the approximate same location. If the other station is at LOS and you are at AOS, your dial readings could be 15Khz apart. It's a great way to miss a 60 second window.
The trick here is to use the same point of reference. That reference would be the frequency you are on at the satellite receiver. The whole idea of doppler correction is to be at a constant frequency within the satellite receiver passband. To do that you have to adjust your uplink frequency constantly. And you have to adjust your downlink frequency to continue to hear yourself or someone else using full doppler correction.
Erich has now added the option of seeing the frequency you are on at the satellite receiver. This is a common frame of reference so if you tell someone you'll be on 435.845 at the satellite, they can be on that same frequency even though your terrestrial dial frequencies will be much different. Just adjust your receiver or use the up/down buttons in SatPC32 to set your frequency shown in the "Sat" window. That frequency will remain constant as your uplink and downlink are controlled by SatPC32.
If you haven't managed to interface your radio with SatPC32, this is just another reason to do so. Staying at a constant frequency at the satellite allows many stations to share the bird without drifting into each other. And being able to know exactly where you are in the passband without doing the calculation in your head gives you more time to concentrate on making a successful QSO! Rumor has it that even a certain Maritime Mobile will soon be controlling his radio with SatPC32.
73, John K8YSE