Hi Greg,
Guess I'll feed the downconverter into my FT-817ND and see if I can get things going that way with SATPC controlling doppler on both rigs..
Many thanks!
Al W8KHP ----- Original Message ----- From: Greg D. To: tokens@myranch.com ; amsat-bb@amsat.org Sent: Saturday, August 08, 2009 2:09 PM Subject: RE: [amsat-bb] AO-51 V/S mode
Hi Allen,
If you have both Rx and Tx on the same band, then both directions will be using the same RF connector on the rig. I suppose if you are REALLY careful you can put an antenna switch between them, but you need to make really sure you don't transmit into the back of your downconverter. And since you won't be able to hear yourself, this arrangement is probably only going to work in FM mode.
I've done VS with my FT-736R, but my 13cm receive is through a separate rig (an all-mode scanner). I also modified my downconverter for a 300mhz IF so that I wouldn't have any interference regardless of the uplink (2m/70cm). The 736 was only used for the uplink.
Good luck,
Greg KO6TH
From: tokens@myranch.com To: amsat-bb@amsat.org Date: Sat, 8 Aug 2009 13:48:24 -0400 Subject: [amsat-bb] AO-51 V/S mode
I would like to try this mode using a K5GNA downconverter. The problem is I am using an FT-736R and apparently you can not have Xmit and Rcv on same band in satellite mode. I am using SATPC-32 for doppler control. The downconverter uses a 2m IF. Anyone else with an FT-736R have this worked out?
Many thanks!!
73, Al W8KHP _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------------------------------------------------------ Get back to school stuff for them and cashback for you. Try Bing now.