Excellent idea, will try that, thanks Steve. 73!Umesh
On Wednesday, February 6, 2019, 10:42:49 AM PST, Stephen E. Belter seb@wintek.com wrote:
Just my guess: If you’re tuning so that you sound good to yourself, you may sound a little high (or low) to someone else. Also, since most people you’re operating don’t know what you sound like in person (James Earle Jones or Pee Wee Hermon).
You can check your tuning by sending a tone and zero-bearing with the received tone.
Or experiment with adjusting your received signal so that you’re a little low (or high) with what sounds best to you. Then see if you’re still chasing each other up (or down) the band.
73, Steve N9IP -- Steve Belter, seb@wintek.com
On Feb 6, 2019, at 1:31 PM, "k6vug@sbcglobal.net" k6vug@sbcglobal.net wrote:
That is exactly right, with the fully computer controlled setup I can move the downlink (RX) up and down the pass band looking for callers and not have to touch the TX frequency as it is managed by the software and can hear my own voice with a steady tone quite well.
- Umesh
On Wednesday, February 6, 2019, 9:44:56 AM PST, Paul Stoetzer n8hm@arrl.net wrote:
Umesh, If you can tune around and always hear your own downlink on the correct frequency, then you are doing everything right. 73, Paul, N8HM On Wed, Feb 6, 2019 at 12:42 PM k6vug@sbcglobal.net k6vug@sbcglobal.net wrote:
Good Morning All, I'd like to understand something that seems to be happening with SSB birds.
I realize that they are two kinds of operators - one that has a computer controlled station and one that tunes manually, and I respect both types. The following observation is about two computer controlled stations working via a SSB satellite - (a) My station is computer controlled (SatPC32 or HRD) and can hear myself on the downlink throughout the pass. I can also go up or down the pass band and still hear myself without needing to retune the uplink. It is pretty rock solid, almost like HF operation. (b) Sometimes I hear a station calling CQ and it remains on the same frequency during successive CQs, so I'm guessing their station is also computer controlled. I can tune in and stay on their calling frequency. (c) However, when I can respond, it seems they have to tune their downlink a bit to hear me well. So when they come back to my response, they are a bit off-frequency (about 300Hz) and sound like Mickey Mouse, until I retune the downlink to hear them well again. This keeps happening throughout the QSO. (d) This "drifting" happens only with some stations calling CQ and not everyone. Considering both stations are computer controlled at each end, I'm trying to understand if I'm doing anything wrong/incorrect. Learning to operate SSB sats has been humbling as well as exciting, I'd appreciate any pointers for this situation. Thanks in advance. 73! Umesh k6vug
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb