Question I have is, is it possible to use SatPC32 to control 1 FT-817 either in split frequency or in each VFO (ie switching between VFO A & B) with the Doppler shift corrections? At this time my FT-817 is my only 2m/70cm rig that supports SSB and I would like to be able to operate on the linear birds especial ARISSat-1 when its launched. I'm fully aware I would not be able to hear myself in the preferred full duplex operation, but something is better then nothing until I can acquire another SSB rig either in 2m or 70cm.
~73, AC2RF Ron
On Thu, Feb 10, 2011 at 2:21 PM, David Palmer dave@zdap.com wrote:
Hi Clint and James,
I've got a full write-up on my 2 x FT-817ND system with SatPC32 on my page at:
http://kb5wia.blogspot.com/2010/10/satellite-portable-station.html
It includes details configuation, screenshot, cables, setup, etc. Same config will apply to an 817+857 install.
73 de Dave KB5WIA / CM88
On Thu, Feb 10, 2011 at 9:45 AM, Clint Bradford clintbradford@mac.com wrote:
James Brown (no, not THAT "James Brown") needs assistance with SatPC32 -
Would a SatPC32 guru please answer him directly at ...
jimki6wj@sbcglobal.net
JAMES: Wondering if you have instructions to make ft817 and ft857
connect to sat32pc and how that works. I have the 857 working as primary. Thanks, Jim KI6WJ
Many thanks - I just am not that familiar with SatPC32 ...
Clint K6LCS _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb