Hi Doug, KA9DLP
Hold the RX steady and adjust the TX for doppler.This is what I did manually from OSCAR-6 and I do actually on VO-52, FO-29 and OSCAR-7
73" de
i8CVS Domenico
----- Original Message ----- From: "Douglas Phelps" dphelps1@ameritech.net To: amsat-bb@amsat.org Sent: Thursday, June 09, 2011 2:59 AM Subject: [amsat-bb] SSB Operation on the satellites.
I am new to the satellites. Got to where I can hear my downlink if the bird is higher than 15 degrees. My question is about handling the doppler shift.
If you do not have a sat program automatically correcting you rig frequency, what is the most common or preffered technique? 1 - Hold the TX steady and adj the RX for doppler or 2- Hold the RX steady and adjust the TX for doppler? I know this must be a basic question but I am learning. Thanks,
Doug K9DLP _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb