I've been struggling with a 9100 and HRD, and finally got it working reliably with a CT-17 USB->CI-V adapter at 19,200.
My only trouble now is something that a lot of people discuss - I can only get it to adjust one VFO at a time, despite the setting in 'Radio Options' that is designed for the 9100.
Has anyone successfully gotten HRD to manipulate both VFO? I do not want to use two radios or two different software programs if I can help it.
Thank you,
KK6ZHZ
- Eli Caul
Director of Customer Care Sonic 707-237-6201 Direct 707-521-0131 Faxline
-----Original Message----- From: AMSAT-BB amsat-bb-bounces@amsat.org On Behalf Of David W0DHB Sent: Tuesday, January 29, 2019 16:23 To: 'Bob Keating' bkeating1954@gmail.com; amsat-bb@amsat.org Subject: Re: [amsat-bb] SatPC32 and Ham Radio Deluxe
One of the 9100 serial ports is for CI-V and the other is for Radio Cloning, etc
Bob's suggestion is spot on. You can find VSPE at http://www.eterlogic.com/Products.VSPE.html
-----Original Message----- From: AMSAT-BB amsat-bb-bounces@amsat.org On Behalf Of Bob Keating Sent: Saturday, January 26, 2019 13:29 To: amsat-bb@amsat.org Subject: Re: [amsat-bb] SatPC32 and Ham Radio Deluxe
Hi George,
I have found that as I have added additional software programs to work with HRD, such as N1MM Logger and HDSDRplay, I have had to install Virtual Serial Ports Emulator and run the Splitter function. It creates a number of virtual serial ports that I can connect HRD, N1MM and HDSDR without any conflict. On my system I point VSPE to COM 4 and then have created a virtual serial port at COM 20. HRD, N1MM and HDSDR and then connected to COM 20 and they all work fine. Give that a try and see if it helps. Good luck!
73,
Bob N6REK
On 1/25/2019 4:48 PM, George Sakai via AMSAT-BB wrote:
Hi All, I have just installed Ham Radio Deluxe in my Windows 10 computer which I use for SatPC32. My radio is IC-9100. The computer has two COM ports. One is used for SatPC32 and I designated the second COM port for the Ham Radio Deluxe. But, the Ham Radio Deluxe does not connect to IC-9100. What am I doing wrong? Appreciate any help. 73, George N3GS, EM28 in Kansas _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb