Running SatPC32 here and am wondering how to configure the SQF files to drive the IC910H for the ISS. Since most of the ISS frequencies are 2M/2M (up and down links), will the software control for this V/V mode or does one have to do the manual operation for the ISS? Thanks LOUIS, KD5GM CW, The original digital mode
Louis,
Satpc32ISS is what you want to use for same band operations with the 910. You can find it by clicking start> programs> satpc32. There will be a list of all the programs that install with satpc32. Hope this helps.
Dave - KB1PVH
Sent from my Verizon Wireless DROID
On May 22, 2010 8:17 PM, "Louis House, KD5GM" kd5gm@sbcglobal.net wrote:
Running SatPC32 here and am wondering how to configure the SQF files to drive the IC910H for the ISS. Since most of the ISS frequencies are 2M/2M (up and down links), will the software control for this V/V mode or does one have to do the manual operation for the ISS? Thanks LOUIS, KD5GM CW, The original digital mode _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
Dave Webb KB1PVH -
Louis House, KD5GM