Hello Howard, I just tested CAT steering of 2 Yaesu transceivers. Since I don't have a FT-857 I made the test with my FT-847 as "Radio 1" on the uhf antenna and the FT-817 as "Radio 2" on the vhf antenna. That worked flawlessly also with SSB sats. With FO-29 I could tune the FT-847 as RX and the FT-817 as TX followed, with VO-52 I could tune the FT-817, now the RX, and the FT-847, now as TX, followed. Also the "Uplink Calibration" (menu "CAT") was no problem. Lateron I configured the FT-817 as "Radio 1" and the FT-847 as "Radio 2" and that worked also flawlessly.

I will send you my setup with a separate mail off the list.

73s, Erich, DK1TB

----- Original Message ----- From: "Howard Kowall" hkowall@shaw.ca To: "AMSAT-BB@amsat.org" amsat-bb@amsat.org Sent: Friday, May 15, 2009 6:22 PM Subject: [amsat-bb] Satpc32 with 2 Transceivers

Good morning everyone Trying to run Satpc32 with a FT897d and FT817nd The ft897nd is on the uhf antenna and the ft817nd is on the vhf antenna it all seems to work on the FM sats but having some problems with ssb sats AO7,VO52,FO29 The trouble I am having is on the calibration of the freq. and doppler adjument has anyone run into this hopefully someone has a few pointers and tricks Thanks to all who reply Howard VE4ISP

---

Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb