Hi Trevor,

If my memory does not fail, try this:

Make sure you check the sound card configurations, check the level of line-in is a good level audio, based on the waterfall with the radio on and the open squelshe. Also check the connection between audio output of radio and line-in PC.

Go to "Mode", select "Packet", still in "Mode" go to "Settings Mode" in "General" tab, "Incomings MyCalls" putting your call sign. In the tab "Modem" choice "VHF 1200 baud (Standard 1200/2200Hz)", click OK to finish.

To connect a station go to "Mode", "Connect" in the "My Call" put your call, in the "Remote" put the call of the desired station, Click the "Connect", is done.

VY 73 de Carlos Paoli - PY2FFZ

________________________________ De: Trevor . m5aka@yahoo.co.uk Para: amsat-bb@amsat.org Enviadas: Terça-feira, 4 de Janeiro de 2011 18:40:13 Assunto: [amsat-bb] Receiving Packet using MixW?

Hi,

I'm trying to receive 1200bps FM packet using the MixW program but am unable to get it to decode anything.

If anyone has had success with this program or can point me to an idiots guide to setting it up please contact me off-list.

73 Trevor M5AKA