Coax Assemblies for Arrow Antenna 437 X 14
![](https://secure.gravatar.com/avatar/097dd8a1a24d6b3b7bd1bbefc95e694f.jpg?s=120&d=mm&r=g)
Hello - does anyone know if there are coaxial cable assemblies commercially available for the Arrow 437 X 14 to make it circular polarization? It so, seems like a fairly inexpensive way to get a circularly polarized antenna for satellite work. I'm looking for smaller circularly polarized antennas that could be used in my portable LEO SSB satellite setup.
http://www.arrowantennas.com/arrowii/437x14ii.html
Thanks, Dave N2TEB
![](https://secure.gravatar.com/avatar/44306c7d6d43785fa9eb302e86273cb6.jpg?s=120&d=mm&r=g)
I built a manual phasing harness for the Arrow 70cm cross Yagi back in the AO-40 days. After a quick search I found my old QSL.net webpage. Everything you need to make your own phasing harness is here. Read the stuff along the left side..
http://www.qsl.net/kb2m/index.html
Here is a thread from 2007 about this subject...
http://www.amsat.org/amsat/archive/amsat-bb/200712/msg00021.html
73 Jeff kb2m
-----Original Message----- From: David Mennerich Sent: Sunday, November 06, 2016 6:23 AM To: [email protected] Subject: [amsat-bb] Coax Assemblies for Arrow Antenna 437 X 14
Hello - does anyone know if there are coaxial cable assemblies commercially available for the Arrow 437 X 14 to make it circular polarization? It so, seems like a fairly inexpensive way to get a circularly polarized antenna for satellite work. I'm looking for smaller circularly polarized antennas that could be used in my portable LEO SSB satellite setup.
http://www.arrowantennas.com/arrowii/437x14ii.html
Thanks, Dave N2TEB
participants (2)
-
David Mennerich
-
Jeff