I am trying to program some satellite frequencies into my TM-D710. Has anyone had any luck with programming a cross band split into the memory? I was able to do this with my VX-7R and assumed that all radios would support this.
If not possible, how do the D710 users in the group operate the birds?
Thanks in advance,
Reid N0RC
On 08/17/2010 04:50 PM, Reid Crowe wrote:
I am trying to program some satellite frequencies into my TM-D710. Has anyone had any luck with programming a cross band split into the memory? I was able to do this with my VX-7R and assumed that all radios would support this.
If not possible, how do the D710 users in the group operate the birds?
I'm using both VFOs as in uplink on left side and downlink on right side.
Kai Gunter LA3QMA
This isn't going to help you much but I use two seperate radios so I can have full duplex capability. Plus you don't have to fiddle with duplexers and all that good stuff.
73 Matt W5LL
On 8/17/2010 12:31 PM, Kai Gunter Brandt wrote:
On 08/17/2010 04:50 PM, Reid Crowe wrote:
I am trying to program some satellite frequencies into my TM-D710. Has anyone had any luck with programming a cross band split into the memory? I was able to do this with my VX-7R and assumed that all radios would support this.
If not possible, how do the D710 users in the group operate the birds?
I'm using both VFOs as in uplink on left side and downlink on right side.
Kai Gunter LA3QMA _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (3)
-
Kai Gunter Brandt -
Matt Patterson -
Reid Crowe