Richard, the May/June AMSAT Journal contains a great “how to” on setting up FT4 for sat work. The authors were very helpful assisting me with my TS2Kx and SATPC. The SATPC settings are critical.

Craig N6RSX

From: Richard Lawn rjlawn@gmail.com Sent: Saturday, December 18, 2021 3:08 PM To: Amsat BB amsat-bb@amsat.org Subject: [AMSAT-BB] Help with FT4 on RS44

I'll resent this since the screen shot that was attached to the earlier message is probably to large a file for this list.

I've tried everything I know including watching YouTube tutorials but I cannot get FT4 to work on RS44. My setup is as follows:

IC-9700 Win4IcomSuite SatPC32 2 copies of WSJTX on for RX only.

I can hear and see my signal on the RX version of WSJT-X but no decodes. Screen shot of the widegraph is attached

Any ideas appreciated Rick, W2JAZ

Click herehttps://www.mailcontrol.com/sr/LeLI3ywtRzrGX2PQPOmvUlQqnVH2UXcWmKCfErumVRg2LEnQtFA0v1eUgiB3rV7w_Xl9u_5paqPsVggzUgwWUw== to report this email as spam.

NOTICE: This communication may contain privileged or other confidential information. If you are not the intended recipient of this communication, or an employee or agent responsible for delivering this communication to the intended recipient, please advise the sender by reply email and immediately delete the message and any attachments without copying or disclosing the contents. Thank you.